Anti-Theft System — FAQ

The Anti-Theft System requires hardwiring into your caravan or trailer's 12V electrics — typically 3–5 hours for a competent DIY installer. All other WiTi products (SafeTrack GPS, SafeTow, Breakaway Switch) are plug-and-play and pair wirelessly. Professional installation is available via our dealer & installer finder.

Yes — the Anti-Theft System is compatible with all standard 12V electric trailer brake systems, connecting directly via the trailer's 7-pin or 12-pin connector. Note: it cannot be wired into motorhome braking circuits.

The system draws less than 5mA on standby. For long-term storage, a solar trickle charger or disconnecting the unit is recommended. The system shuts down protectively if voltage drops below ~11.5V.

Only the WiTi SafeTrack app can remote arm and disarm, as long as the GPS module is connected to a Wi-Fi or cellular network. RF remotes have a 5–10m range from the Anti-Theft unit.

The alarm and intrusion detection features work on motorhomes. However, the electric brake lock cannot be wired into motorhome braking circuits. For external lights to flash on alarm, the unit must be wired into the vehicle's lighting circuits — check with your vehicle manufacturer before installation.

All WiTi products carry a 2-year manufacturer's warranty against defects, plus lifetime product support. Australian buyers have additional rights under Australian Consumer Law. To start a claim, contact our support team with your order number and SKU.